About Marshall County Fire and EMS Frequencies
Quick answer: Fire dispatch for Marshall County: Marshall County Fire 154.2050 MHz, narrow FM, 114.8 PL. EMS dispatch for Marshall County: Marshall County EMS 155.9550 MHz, narrow FM, 127.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Marshall County Fire talkgroup 51308 (hex c86c).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marshall County, start with the Donaldson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.1125, 851.8625 MHz.
Data updated .
Marshall County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Fire | County Fire Depts. | 154.2050 | 114.8 PL | FMN | — |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Fire | Warren Public Works/Fire | 155.6250 In 154.9500 | 114.8 PL | FMN | KCE892 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County EMS | Warren EMS Page | 155.9550 | 127.3 PL | FMN | KCE892 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall County Hospital | North Valley Health Center | 155.3250 | 127.3 PL | FMN | WPYN796 |
Marshall County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Marshall County Fire | Marshall Fire Main | 51308 | c86c | D |
| Marshall County Fire | Marshall Fire Tactical | 51309 | c86d | D |
| Marshall County Fire | Marshall County Fire – Tactical Channel | 51311 | c86f | D |
| Marshall County EMS | Marshall EMS | 51314 | c872 | D |
Radio system sites in Marshall County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Marshall County
- Agder
- Alma
- Alvarado
- Argyle
- Augsburg
- Big Woods
- Bloomer
- Boxville
- Cedar
- Como
- Comstock
- Donnelly
- Eagle Point
- East Park
- East Valley
- Eckvoll
- Espelie
- Excel
- Foldahl
- Fork
- Grand Plain
- Grygla
- Holt
- Huntly
- Lincoln
- Linsell
- Marsh Grove
- McCrea
- Middle River
- Moose River
- Moylan
- Nelson Park
- New Maine
- New Solum
- Newfolden
- Oak Park
- Oslo
- Parker
- Rollis
- Sinnott
- Spruce Valley
- Stephen
- Strandquist
- Tamarac
- Thief Lake
- Valley
- Vega
- Veldt
- Viking
- Wanger
- Warren
- Warrenton
- West Valley
- Whiteford
- Wright
Common questions
What frequency does the fire department use in Marshall County?
Fire dispatch channels listed for Marshall County: Marshall County Fire 154.2050 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Marshall County?
EMS dispatch channels listed for Marshall County: Marshall County EMS 155.9550 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Marshall County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marshall County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marshall County?
For Marshall County, start with the Donaldson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.1125, 851.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Marshall County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Marshall County are marked encrypted.
Are Marshall County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Marshall County are marked encrypted.