Skip to content

Kittson County Fire and EMS Frequencies

Kittson County in Minnesota has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 33 cities and communities below for local fire departments and EMS agencies.

About Kittson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Kittson County: Kittson County Fire 154.3700 MHz, narrow FM, 114.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Kittson County Fire talkgroup 50703 (hex c60f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kittson County, start with the Lake Bronson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.1625, 854.0875 MHz.

Data updated .

Kittson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Kittson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittson County FireCounty Fire154.3700114.8 PLFMNWPKI594

Hospitals & Medical

Hospitals & Medical frequencies for Kittson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittson County HospitalKittson Memorial Hosp.155.3250110.9 PLFMNKT0509

Kittson County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Kittson County FireKittson Fire/EMS Dispatch50703c60fD
Kittson County FireLandcaster Fire Tactical50707c613D

Radio system sites in Kittson County

Program the control channel first; your scanner finds the voice channels from it.

Lake Bronson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 1 (hex 1)
Control 851.1625, 854.0875
Voice 851.9625, 852.8875, 853.1
Lancaster · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 2 (hex 2) · NAC 407
Control 854.1875, 854.3875
Voice 851.8375, 852.675, 853.15
Northcote · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 3 (hex 3)
Control 852.1375, 853.125
Voice 851.2375, 853.5, 854.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kittson County

Common questions

What frequency does the fire department use in Kittson County?

Fire dispatch channels listed for Kittson County: Kittson County Fire 154.3700 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Kittson County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kittson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kittson County?

For Kittson County, start with the Lake Bronson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.1625, 854.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kittson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Kittson County are marked encrypted.

Are Kittson County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Kittson County are marked encrypted.