Skip to content

Jackson County Fire and EMS Frequencies

Jackson County in Minnesota has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Jackson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Jackson County: Jackson County Fire 158.8200 MHz, narrow FM, 186.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Jackson County Fire talkgroup 31304 (hex 7a48).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jackson County, start with the Lakefield site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.375, 851.775 MHz.

Data updated .

Jackson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireFIRE-EMS158.8200
In 155.9850
186.2 PLFMNWNGN653

Hospitals & Medical

Hospitals & Medical frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County HospitalJackson Medical Center155.4000107.2 PLFMNWGR854

Jackson County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Jackson County FireJackson County Fire – Dispatch313047a48D

Radio system sites in Jackson County

Program the control channel first; your scanner finds the voice channels from it.

Lakefield · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 24 (hex 18)
Control 851.375, 851.775
Voice 852.9125, 858.7375, 859.7375
Brewster · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 25 (hex 19)
Control 852.4625, 859.4625
Voice 851.9625, 856.4625, 857.4625
Windom · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 30 (hex 1E)
Control 853.175, 857.2125
Voice 852.175, 855.4875, 856.7125
Jackson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 78 (hex 4E)
Control 853.5625, 853.8125
Voice 851.075, 851.325, 851.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jackson County

Common questions

What frequency does the fire department use in Jackson County?

Fire dispatch channels listed for Jackson County: Jackson County Fire 158.8200 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Jackson County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jackson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jackson County?

For Jackson County, start with the Lakefield site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.375, 851.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Jackson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Jackson County are marked encrypted.

Are Jackson County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Jackson County are marked encrypted.