Skip to content

Itasca County Fire and EMS Frequencies

Itasca County in Minnesota has 6 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 54 cities and communities below for local fire departments and EMS agencies.

About Itasca County Fire and EMS Frequencies

Quick answer: Fire dispatch for Itasca County: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL. EMS dispatch for Itasca County: Itasca County EMS 155.2800 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Itasca County Fire talkgroup 38820 (hex 97a4).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Itasca County, start with the Itasca Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.6, 852.75 MHz.

Data updated .

Itasca County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County FireFire Depts. / EMS154.2350
In 158.9850
141.3 PLFMNWQAK394
Itasca County FireItasca Paging155.5575114.8 PLFMNWQJK745/6

EMS Dispatch

EMS Dispatch frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County EMSMeds One Inc.155.2800FMNWNUF766

Hospitals & Medical

Hospitals & Medical frequencies for Itasca County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Itasca County HospitalBigfork Valley Hospital155.355082.5 PLFMNKWI865
Itasca County HospitalDeer River Health Care Center155.355079.7 PLFMNWPGH686
Itasca County HospitalGrand Itasca Clinic & Hospital155.355077.0 PLFMNKWM623

Itasca County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Itasca County FireItasca County Fire – Dispatch3882097a4D
Itasca County FireItasca County Fire – Paging3882497a8D
Itasca County FireSearch & Rescue388029792D
Itasca County FireItasca County Fire – Fire Ground3882297a6D
Itasca County FireItasca County Fire – Fire Ground3882697aaD
Itasca County FireItasca County Fire – Tactical Channel389369818D
Itasca County FireBUCK LAKE FIRE DEPT Administration389129800D
Itasca County FireALL FIRE38942981eD
Itasca County EMSItasca County EMS – Tactical Channel3882897acD
Itasca County EMSItasca County EMS – Tactical Channel3883097aeD
Itasca County EMSItasca County EMS – Tactical Channel38938981aD
Itasca County EMSMEDS-1 Ambulance Administration389169804D
Itasca County EMSALL EMS389449820D
Itasca County HospitalGrand Itasca Hospital3886097ccD

Radio system sites in Itasca County

Program the control channel first; your scanner finds the voice channels from it.

Itasca Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 44 (hex 2C) · NAC 400
Control 852.6, 852.75
Voice 851.4125, 852.1625, 852.9, 853.175, 853.35, 853.575
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Itasca County

Common questions

What frequency does the fire department use in Itasca County?

Fire dispatch channels listed for Itasca County: Itasca County Fire 154.2350 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Itasca County?

EMS dispatch channels listed for Itasca County: Itasca County EMS 155.2800 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Itasca County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Itasca County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Itasca County?

For Itasca County, start with the Itasca Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.6, 852.75 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Itasca County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Itasca County are marked encrypted.

Are Itasca County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for Itasca County are marked encrypted.