About Grant County Fire and EMS Frequencies
Quick answer: Fire dispatch for Grant County: Grant County Fire 154.2500 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Grant County Fire talkgroup 27316 (hex 6ab4).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Grant County, start with the Herman site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 857.4625, 859.4625 MHz.
Data updated .
Grant County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grant County Fire | Paging X | 154.2500 In 155.9100 | CSQ | FMN | KNFY944 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grant County Hospital | Grant Health / Medical Center | 155.3550 | 71.9 PL | FMN | KNEQ267 |
Grant County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grant County Fire | Grant Co Fire Dispatch | 27316 | 6ab4 | D |
Radio system sites in Grant County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Grant County
Common questions
What frequency does the fire department use in Grant County?
Fire dispatch channels listed for Grant County: Grant County Fire 154.2500 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Grant County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Grant County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Grant County?
For Grant County, start with the Herman site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.4625, 859.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Grant County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Grant County are marked encrypted.
Are Grant County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Grant County are marked encrypted.