Skip to content

Cook County Fire and EMS Frequencies

Cook County in Minnesota has 5 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Cook County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cook County: Cook County Fire 152.0075 MHz, narrow FM, 167.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Cook County Fire talkgroup 38202 (hex 953a).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cook County, start with the Cook Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.075, 854.1625 MHz.

Data updated .

Cook County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County FirePaging X 5 Locations152.0075167.9 PLFMNWQEQ423

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County FireGunflint Trail Fire – Grand Marais154.0475
In 156.0225
FMNWQBN837
Cook County FireGunflint Trail Fire – Grand Marais155.0475
In 158.8725
FMNWQBN837

EMS Talk-around

EMS Talk-around frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County EMSCook Cook County North Shore Hospital155.3550167.9 PLFMNKKL620

Hospitals & Medical

Hospitals & Medical frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County HospitalHospital Reports155.3550167.9 PLFMNKNHF748

Cook County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Cook County FireCounty Paging38202953aD
Cook County FireHovland Fire Tactical38238955eD
Cook County FireGrand Portage Fire Tactical38239955fD
Cook County FireGun Flint Fire Tactical382409560D
Cook County HospitalCook County North Shore Hospital382479567D

Radio system sites in Cook County

Program the control channel first; your scanner finds the voice channels from it.

Cook Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 40 (hex 28)
Control 853.075, 854.1625
Voice 851.2125, 851.4375, 851.7875, 852.0875, 852.4375, 852.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cook County

Common questions

What frequency does the fire department use in Cook County?

Fire dispatch channels listed for Cook County: Cook County Fire 152.0075 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Cook County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cook County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cook County?

For Cook County, start with the Cook Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.075, 854.1625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cook County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Cook County are marked encrypted.

Are Cook County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Cook County are marked encrypted.