About Chippewa County Fire and EMS Frequencies
Quick answer: Fire dispatch for Chippewa County: Chippewa County Fire 154.2650 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Chippewa County Fire talkgroup 29130 (hex 71ca).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.575, 853.825 MHz.
Data updated .
Chippewa County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chippewa County Fire | County Pagers X | 154.2650 In 158.9550 | 110.9 PL | FMN | WPTQ612 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chippewa County Hospital | Chippewa County Montevideo Hospital | 155.4000 | 110.9 PL | FMN | KMK251 |
Chippewa County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chippewa County Fire | Chippewa County Fire – Dispatch | 29130 | 71ca | D |
| Chippewa County Fire | Chippewa County Fire – Paging – 154.2650 VHF | 29150 | 71de | D |
| Chippewa County Fire | Chippewa County Fire – Tactical Channel | 29131 | 71cb | D |
| Chippewa County Fire | Fire T2T | 29132 | 71cc | D |
| Chippewa County EMS | Chippewa County EMS – Dispatch | 29171 | 71f3 | D |
| Chippewa County EMS | County Health | 29172 | 71f4 | D |
| Chippewa County Hospital | Montevideo Hospital | 29170 | 71f2 | D |
Radio system sites in Chippewa County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Chippewa County
Common questions
What frequency does the fire department use in Chippewa County?
Fire dispatch channels listed for Chippewa County: Chippewa County Fire 154.2650 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Chippewa County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Chippewa County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chippewa County?
For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.575, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Chippewa County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Chippewa County are marked encrypted.
Are Chippewa County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Chippewa County are marked encrypted.