Skip to content

Carver County Fire and EMS Frequencies

Carver County in Minnesota has 1 countywide conventional frequency and 8 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Carver County Fire and EMS Frequencies

Quick answer: Fire dispatch for Carver County: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Carver County Fire talkgroup 2716 (hex a9c).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Carver County, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.8875, 852.075, 852.4375 MHz.

Data updated .

Carver County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Carver County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carver County FirePAGE154.1000151.4 PLFMNKWM572

Carver County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Carver County FireCarver County Fire Main2716a9cD
Carver County FireFire Subsystem Roaming2758ac6D
Carver County FireCarver County Fire MA2732aacD
Carver County FireCarver County Fire MA2734aaeD
Carver County FireCarver County Fire/LE Shared2808af8D
Carver County FireCarver City Fire Administration2736ab0D
Carver County FireFire Administration2858b2aD
Carver County EMSCarver Countywide EMS2816b00D

Radio system sites in Carver County

Program the control channel first; your scanner finds the voice channels from it.

Carver - Scott Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 4 (hex 4) · NAC 404
Control 851.8875, 852.075, 852.4375, 853.7875
Voice 851.125, 851.375, 851.4375, 851.7, 852.7, 852.8, 852.9375, 853.225, 853.375, 853.4625, 854.5875, 855.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Carver County

Common questions

What frequency does the fire department use in Carver County?

Fire dispatch channels listed for Carver County: Carver County Fire 154.1000 MHz, narrow FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Carver County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Carver County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Carver County?

For Carver County, start with the Carver - Scott Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.8875, 852.075, 852.4375, 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Carver County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Carver County are marked encrypted.

Are Carver County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Carver County are marked encrypted.