Skip to content

Benton County Fire and EMS Frequencies

Benton County in Minnesota has 3 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Benton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Benton County: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Benton County Fire talkgroup 24946 (hex 6172).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.4, 852.725 MHz.

Data updated .

Benton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireRice Fire Department154.0400
In 158.9400
146.2 PLFMNKNJH312
Benton County FireFoley Fire Department154.2500146.2 PLFMNWPJI508
Benton County FireSauk Rapids 911 – Paging155.1000
In 159.8250
146.2 PLFMNKR9809

Benton County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County FireCounty Fire249466172D

Radio system sites in Benton County

Program the control channel first; your scanner finds the voice channels from it.

Gilman - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 49 (hex 31) · NAC 400
Control 852.4, 852.725
Voice 851.425, 851.8, 851.9, 852.275, 852.875, 853.475, 853.525, 853.825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Benton County

Common questions

What frequency does the fire department use in Benton County?

Fire dispatch channels listed for Benton County: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Benton County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Benton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Benton County?

For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Benton County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Benton County are marked encrypted.

Are Benton County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Benton County are marked encrypted.