About Sanilac County Fire and EMS Frequencies
Quick answer: Fire dispatch for Sanilac County: Sanilac County Fire 151.0100 MHz, NXDN48, no tone. EMS dispatch for Sanilac County: Marlette Community Hospital 152.0075 MHz, narrow FM, no tone; Sanilac County EMS 155.1750 MHz, narrow FM, 192.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Sanilac County Hospital talkgroup 2625 (hex a41).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sanilac County, start with the Sandusky site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 853.4375, 853.9375 MHz.
Data updated .
Sanilac County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sanilac County Fire | Sanilac County Fire – Dispatch | 151.0100 In 153.7700 | NXDN48 | WPYF737 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marlette Community Hospital | Marlette Community Hospital – Paging | 152.0075 | FMN | KTL516 | |
| Sanilac County EMS | Sanilac County EMS – Dispatch | 155.1750 | 192.8 PL | FMN | WYC697 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sanilac County EMS | Health Department | 155.1225 In 158.7675 | FMN | WQCC275 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marlette Community Hospital | Ambulance-to-Hospital Comms | 155.3400 | 141.3 PL | FMN | KTL516 |
| McKenzie Memorial Hospital (Sandusky) | Hospital to Ambulance | 155.3400 | 131.8 PL | FMN | WPXN209 |
Sanilac County trunked talkgroups
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sanilac County Hospital | Medical Control Authority | 2625 | a41 | D |
| Sanilac County Hospital | EMS-to-Deckerville Community Hospital | 2629 | a45 | D |
| Sanilac County Hospital | EMS-to-Marlette Regional Hospital | 2637 | a4d | D |
| Sanilac County Hospital | EMS-to-McKenzie Health System | 2638 | a4e | D |
Radio system sites in Sanilac County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Sanilac County
- Applegate
- Argyle
- Austin
- Bridgehampton
- Brown City
- Buel
- Carsonville
- Croswell
- Custer
- Decker
- Deckerville
- Delaware
- Elk
- Elmer
- Evergreen
- Flynn
- Forester
- Forestville
- Fremont
- Greenleaf
- Lamotte
- Lexington
- Maple Valley
- Marion
- Marlette
- Melvin
- Minden City
- Moore
- Palms
- Peck
- Port Sanilac
- Sandusky
- Sanilac
- Snover
- Speaker
- Washington
- Watertown
- Wheatland
- Worth
Common questions
What frequency does the fire department use in Sanilac County?
Fire dispatch channels listed for Sanilac County: Sanilac County Fire 151.0100 MHz, NXDN48, no tone.
What frequency does EMS or the ambulance service use in Sanilac County?
EMS dispatch channels listed for Sanilac County: Marlette Community Hospital 152.0075 MHz, narrow FM, no tone; Sanilac County EMS 155.1750 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Sanilac County?
Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sanilac County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sanilac County?
For Sanilac County, start with the Sandusky site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sanilac County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Sanilac County are marked encrypted.
Are Sanilac County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Sanilac County are marked encrypted.