About Mecosta County Fire and EMS Frequencies
Quick answer: Fire dispatch for Mecosta County: Mecosta County Fire 154.4450 MHz, narrow FM, 162.2 PL; Morton Township Fire 154.1750 MHz, narrow FM, no tone. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Mecosta County Fire talkgroup 3846 (hex f06).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mecosta County, start with the Big Rapids site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 853.175, 853.55 MHz.
Data updated .
Mecosta County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mecosta County Fire | County Fire Dispatch | 154.4450 In 159.1950 | 162.2 PL | FMN | WNYA542 |
| Morton Township Fire | Morton Township Fire – Dispatch | 154.1750 In 150.7750 | FMN | WQDL932 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mecosta County Fire | County Fireground Operations | 154.3550 | FMN | WNYA542 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spectrum Health Big Rapids | EMS-to-Hospital | 155.3400 | 118.8 PL | FMN | KAR930 |
| Spectrum Health Big Rapids | EMS-to-Hospital | 463.0750 In 468.0750 | 186.2 PL | FMN | WQL989 |
Mecosta County trunked talkgroups
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mecosta County Fire | Mecosta County Fire – Dispatch | 3846 | f06 | D |
| Mecosta County Fire | Countywide Fireground | 3847 | f07 | D |
| Mecosta County Fire | Countywide Fireground | 3848 | f08 | D |
| Mecosta County Fire | Countywide Fireground | 3849 | f09 | D |
| Mecosta County Fire | Big Rapids DPS Fire Proprietary | 13209 | 3399 | D |
| Mecosta County Fire | Mecosta Twp./Austin Twp.- Stanwood area Fire | 13244 | 33bc | D |
| Mecosta County Fire | Mecosta Twp./Austin Twp. (Stanwood area) Fire Proprietary | 13245 | 33bd | D |
| Mecosta County Fire | Big Rapids Twp. Fire Proprietary | 13248 | 33c0 | D |
| Mecosta County Fire | Colfax Twp. Fire Proprietary | 13665 | 3561 | D |
| Mecosta County EMS | Mecosta County EMS – Dispatch | 3845 | f05 | D |
| Mecosta County EMS | EMS Administration | 3577 | df9 | D |
| Mecosta County Hospital | EMS-to-Hospital | 3550 | dde | D |
| Mecosta County Hospital | Medical Control Authority | 3563 | deb | D |
Radio system sites in Mecosta County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Mecosta County
Common questions
What frequency does the fire department use in Mecosta County?
Fire dispatch channels listed for Mecosta County: Mecosta County Fire 154.4450 MHz, narrow FM, 162.2 PL; Morton Township Fire 154.1750 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Mecosta County?
Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mecosta County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mecosta County?
For Mecosta County, start with the Big Rapids site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.175, 853.55 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Mecosta County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Mecosta County are marked encrypted.
Are Mecosta County fire and EMS talkgroups encrypted?
None of the 13 talkgroups listed for Mecosta County are marked encrypted.