Skip to content

Iron County Fire and EMS Frequencies

Iron County in Michigan has 4 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Iron County Fire and EMS Frequencies

Quick answer: Trunked: Michigan's Public Safety Communications System (MPSCS), for example Iron County Fire talkgroup 6195 (hex 1833).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Iron County, start with the Amasa site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 852.4125, 853.4 MHz.

Data updated .

Iron County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iron County FireCounty Fire – search and rescue/EMS155.1900
In 154.7100
103.5 PLFMNWAC379

Hospitals & Medical

Hospitals & Medical frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crystal Falls Community HospitalAmbulance-to-Hospital Comms155.2800173.8 PLFMNKNEZ599
Crystal Falls Community HospitalAmbulance-to-Hospital Comms155.3400107.2 PLFMNKNEZ599
Crystal Falls Community HospitalAmbulance-to-Hospital Comms155.3400173.8 PLFMNKNEZ599

Iron County trunked talkgroups

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Iron County FireFire/EMS Coordination61951833D
Iron County FireIron County Fire – Dispatch70811ba9D
Iron County EMSIron County EMS – Dispatch70821baaD

Radio system sites in Iron County

Program the control channel first; your scanner finds the voice channels from it.

Amasa · Michigan's Public Safety Communications System (MPSCS)
RFSS 6 · Site 29 (hex 1D) · NAC 799
Control 852.4125, 853.4
Voice 851.4375, 851.925
Iron River · Michigan's Public Safety Communications System (MPSCS)
RFSS 6 · Site 30 (hex 1E) · NAC 792
Control 852.9, 853.875
Voice 851.95, 852.425
Crystal Falls · Michigan's Public Safety Communications System (MPSCS)
RFSS 6 · Site 31 (hex 1F) · NAC 79C
Control 852.4375, 853.3875
Voice 851.4875, 851.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Iron County

Common questions

Do fire departments and EMS use a trunked radio system in Iron County?

Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Iron County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Iron County?

For Iron County, start with the Amasa site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.4125, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Iron County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Iron County are marked encrypted.

Are Iron County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Iron County are marked encrypted.