Skip to content

Clinton County Fire and EMS Frequencies

Clinton County in Michigan has 3 countywide conventional frequencies and 16 countywide talkgroups in our database. Use the list of 25 cities and communities below for local fire departments and EMS agencies.

About Clinton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clinton County: Clinton County Fire 154.2200 MHz, narrow FM, CSQ. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Clinton County Fire talkgroup 315 (hex 13b).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clinton County, start with the Clinton County Simulcast site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 852.55, 853.0875, 853.5875 MHz.

Data updated .

Clinton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireCountywide Fire Dispatch (Simulcast on TRS)154.2200
In 150.8050
CSQFMNKWX986

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireTri-County Fire Mutual Aid Network (Clinton, Eaton, Ingham)453.7500
In 458.7500
546 DPLFMNWPEX646

Hospitals & Medical

Hospitals & Medical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
UM Health SparrowEnvironmental Services452.2125
In 457.2125
CC 1 · TG * · SL *DMRWQGK335

Clinton County trunked talkgroups

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Clinton County FireFire-EMS Dispatch31513bD
Clinton County FireBath Township Fire Page60525dD
Clinton County FireClinton County Fire – Fire Ground31613cD
Clinton County FireClinton County Fire – Fire Ground31713dD
Clinton County FireClinton County Fire – Fire Ground31813eD
Clinton County FireClinton County Fire – Fire Ground31913fD
Clinton County FireWater Tanker34815cD
Clinton County FireWater Tanker34915dD
Clinton County FireBath Twp Fire Administration296128D
Clinton County FireDeWitt Twp Fire Administration307133D
Clinton County FireOvid Middlebury Fire Administration323143D
Clinton County FireFire Operations324144D
Clinton County FireFire Operations325145D
Clinton County FireFire Operations326146D
Clinton County EMS/HospitalClinton Area Ambulance Service29912bD
Clinton County EMS/HospitalClinton EMS Dispatch30012cD

Radio system sites in Clinton County

Program the control channel first; your scanner finds the voice channels from it.

Clinton County Simulcast · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 28 (hex 1C) · NAC 798
Control 852.55, 853.0875, 853.5875, 853.8375
Voice 771.25265, 772.93125, 854.7375, 856.9625, 857.2125, 857.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clinton County

Common questions

What frequency does the fire department use in Clinton County?

Fire dispatch channels listed for Clinton County: Clinton County Fire 154.2200 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Clinton County?

Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 16 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clinton County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clinton County?

For Clinton County, start with the Clinton County Simulcast site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.55, 853.0875, 853.5875, 853.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clinton County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Clinton County are marked encrypted.

Are Clinton County fire and EMS talkgroups encrypted?

None of the 16 talkgroups listed for Clinton County are marked encrypted.