About Arenac County Fire and EMS Frequencies
Quick answer: Fire dispatch for Arenac County: Arenac County Fire 154.4300 MHz, narrow FM, 91.5 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Arenac County Fire talkgroup 1548 (hex 60c).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Arenac County, start with the Sterling site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 853.3875, 853.875 MHz.
Data updated .
Arenac County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Arenac County Fire | County Fire Dispatch | 154.4300 In 153.7700 | 91.5 PL | FMN | WPLW664 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Arenac County Fire | All Departments Tactical | 153.8300 | 91.5 PL | FMN | KC4002 |
Arenac County trunked talkgroups
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Arenac County Fire | Arenac County Fire – Dispatch | 1548 | 60c | D |
| Arenac County Fire | Fire Administration | 11851 | 2e4b | D |
| Arenac County Hospital | Medical Control Authority | 2616 | a38 | D |
| Arenac County Hospital | St. Marys Hospital | 2644 | a54 | D |
Radio system sites in Arenac County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Arenac County
Common questions
What frequency does the fire department use in Arenac County?
Fire dispatch channels listed for Arenac County: Arenac County Fire 154.4300 MHz, narrow FM, 91.5 PL.
Do fire departments and EMS use a trunked radio system in Arenac County?
Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Arenac County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Arenac County?
For Arenac County, start with the Sterling site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.3875, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Arenac County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Arenac County are marked encrypted.
Are Arenac County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Arenac County are marked encrypted.