Skip to content

Alger County Fire and EMS Frequencies

Alger County in Michigan has 4 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Alger County Fire and EMS Frequencies

Quick answer: Fire dispatch for Alger County: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Alger County Fire talkgroup 5055 (hex 13bf).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Alger County, start with the Grand Marais site of Michigan's Public Safety Communications System (MPSCS). Its control channels: 853.475, 853.975 MHz.

Data updated .

Alger County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alger County FireCountywide Fire Repeater154.1000
In 156.0150
100.0 PLFMNKNDZ232

Fire Talk-around

Fire Talk-around frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alger County FireTri-County Fire Talkaround151.9550FMN—

Hospitals & Medical

Hospitals & Medical frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Munising Memorial HospitalAmbulance-to-Hospital Comms155.3400FMNKNGP470
Munising Memorial HospitalMunising Memorial Hospital – Paging157.4500FMNKNGP470

Alger County trunked talkgroups

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Alger County FireFire-EMS Dispatch505513bfD
Alger County FireIndian Lake First Responders Page234365b8cD
Alger County HospitalCounty EMS to Hospital505613c0D
Alger County HospitalCounty EMS to Hospital505813c2D
Alger County HospitalCounty EMS to Hospital505913c3D

Radio system sites in Alger County

Program the control channel first; your scanner finds the voice channels from it.

Grand Marais · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 3 (hex 3) · NAC 796
Control 853.475, 853.975
Voice 851.975, 852.975
Sundel · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 23 (hex 17) · NAC 79A
Control 853.3875, 853.825
Voice 851.2875, 851.4875, 851.9625, 852.4375
Munising · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 24 (hex 18) · NAC 79B
Control 852.8875, 853.375
Voice 851.475, 852.3625, 852.7125
Melstrand · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 25 (hex 19) · NAC 799
Control 852.9625, 853.95
Voice 851.9875, 852.475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Alger County

Common questions

What frequency does the fire department use in Alger County?

Fire dispatch channels listed for Alger County: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Alger County?

Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Alger County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Alger County?

For Alger County, start with the Grand Marais site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.475, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alger County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Alger County are marked encrypted.

Are Alger County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Alger County are marked encrypted.