About Belfast Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Belfast: Waldo County Fire 155.3850 MHz, FM, 123.0 PL.
- 15 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Belfast conventional frequencies
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Belfast Fire | Belfast Fire – Alternate | 155.8050 | FMN | WQKU250 |
Waldo County channels that also cover Belfast
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waldo County Fire | County Fire/EMS Dispatch North | 155.3850 In 153.9500 | 123.0 PL | FM | WPTN228 |
| Waldo County Fire | County Fire/EMS Dispatch South | 156.1875 In 151.1000 | 123.0 PL | FM | WPTN228 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waldo County Fire | Quaker Hill Common Channel | 155.1750 In 154.0700 | 82.5 PL | FMN | WPFS731 |
| Waldo County Fire | Common Channel -1-Knox | 155.6625 In 151.4300 | 123.0 PL | FMN | WQKQ440 |
| Waldo County Fire | Waldo County Fire – Tactical Channel | 155.8275 | FMN | WQLP944 | |
| Waldo County Fire | Mount Harris CC EMA/IMAT | 156.1725 In 159.0825 | 123.0 PL | FMN | — |
| Waldo County Fire | Waldo County Fire – Tactical Channel | 158.9475 | FMN | WQLP944 | |
| Waldo County Fire | Waldo County Fire – Tactical Channel | 158.9775 | FMN | WQLP944 | |
| Waldo County Fire | Common Channel-2-Belfast | 159.1050 In 154.8975 | 123.0 PL | FMN | WQLG305 |
| Waldo County Fire | Common Channel 4-Frankfort | 159.1350 In 158.9925 | 123.0 PL | FMN | KNEL322 |
| Waldo County Fire | Common Channel- 3-Palmero | 159.4650 In 151.3250 | 123.0 PL | FMN | WQCS201 |
| Waldo County Fire | Fire UHF 1 Tactical | 453.7375 | FMN | WQLP942 | |
| Waldo County Fire | Fire UHF 2 Tactical | 458.7375 | FMN | WQLP942 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waldo County Hospital | Waldo General Hospital (Belfast) | 155.3550 | 123.0 PL | FM | KVS243 |
Nearest trunked radio sites
Distances are measured from the center of Belfast.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Belfast?
We do not have a fire dispatch channel listed specifically for Belfast. The county-level fire dispatch channels in the same county: Waldo County Fire 155.3850 MHz, FM, 123.0 PL.
What scanner do I need to listen to fire and EMS in Belfast?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Belfast?
For Belfast, start with the Auburn Lewiston Simulcast site of Auburn - Lewiston. Its control channels are 856.0125, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Belfast fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Belfast are marked encrypted.