Skip to content

Bath Fire and EMS Frequencies

Bath in Sagadahoc County, Maine has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Auburn Lewiston Simulcast (Auburn - Lewiston), about 22 miles away.

About Bath Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bath: Sagadahoc County Fire 154.2950 MHz, narrow FM, 127.3 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Bath conventional frequencies

Fire Talk-around

Fire Talk-around frequencies for Bath
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bath FireFire Primary154.1750FMNKNGW950

Sagadahoc County channels that also cover Bath

Fire Dispatch

Fire Dispatch frequencies for Sagadahoc County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sagadahoc County FireCounty Fire154.2950
In 153.7850
127.3 PLFMNKNBA854

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sagadahoc County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sagadahoc County FireFire Operations South154.1000127.3 PLFMNWQU467
Sagadahoc County FireCounty Fire Tactical154.1450103.5 PLFMNKNFT961
Sagadahoc County FireCounty Fire Tactical154.1750156.7 PLFMNWNRA710
Sagadahoc County FireCommand154.220094.8 PLFMNWNNV444
Sagadahoc County FireSagadahoc County Fire – Tactical Channel154.2650FMN—
Sagadahoc County FireSagadahoc County Fire – Tactical Channel154.2800FMN—

Nearest trunked radio sites

Distances are measured from the center of Bath.

Auburn Lewiston Simulcast · Auburn - Lewiston
RFSS 1 · Site 1 (hex 1) · NAC 32 · about 22 mi away
Control 856.0125, 857.4625
Voice 856.0375, 856.0625, 856.0875, 856.2125, 856.2625, 857.2625
Portland Simulcast · Portland
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 28 mi away
Control 852.7875, 853.2875, 853.5375, 853.7875
Voice 851.0625, 851.2875, 851.3125, 851.5625, 851.7875
Biddeford Simulcast · Biddeford Municipal Trunk
RFSS 1 · Site 1 (hex 1) · NAC B61 · about 66 mi away
Control 851.15, 851.8125
Voice 852.4625, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bath?

We do not have a fire dispatch channel listed specifically for Bath. The county-level fire dispatch channels in the same county: Sagadahoc County Fire 154.2950 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Bath?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bath?

For Bath, start with the Auburn Lewiston Simulcast site of Auburn - Lewiston. Its control channels are 856.0125, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bath fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Bath are marked encrypted.