Skip to content

Aurora Fire and EMS Frequencies

Aurora in Hancock County, Maine has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Auburn Lewiston Simulcast (Auburn - Lewiston), about 110 miles away.

About Aurora Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Aurora: Hancock County Fire 154.2500 MHz, FM, 151.4 PL. County-level ems dispatch that covers Aurora: Hancock County EMS 151.5500 MHz, DMR, CC 14 · TG 10 · SL *.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Aurora conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Aurora
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aurora FireFire Operations154.3700127.3 PLFMWNWZ918

Hancock County channels that also cover Aurora

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireCounty Fire Dispatch154.2500
In 153.8900
151.4 PLFMWPXL919
Hancock County FireMount Desert Island Fire173.7625
In 164.6750
131.8 PLFMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Eggemoggin Fire(Deer Isle, Sedgwick, Stonington)Eggemogin Fire154.0100151.4 PLFMKNJT559
Hancock County FireHancock County-Bar Harbor Airport Fire151.0550151.4 PLFMNKNNM215
Sedgwick(Now part of Eggemoggin Fire)Fire Local Operations154.130094.8 PLFMWPMY839

Fire Talk-around

Fire Talk-around frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stonington(Now part of Eggemoggin Fire)Stonington Fire Department154.4300
In 151.0325
151.4 PLFMKNGD598

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSNorthern Lights EMS151.5500
In 159.4950
CC 14 · TG 10 · SL *DMR—
Hancock County EMSNorthern Lights EMS DMR152.9975
In 159.9600
CC 14 · TG 10 · SL *DMR—
Hancock County EMSHancock County EMS159.1800
In 156.2400
306 DPLFMWQAQ315

EMS Talk-around

EMS Talk-around frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSMemorial Ambulance Operations155.2200179.9 PLFMNKEG448

Hospitals & Medical

Hospitals & Medical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County HospitalRegion 4 Ambulance-to-Hospital155.3550FMVARIOUS

Nearest trunked radio sites

Distances are measured from the center of Aurora.

Auburn Lewiston Simulcast · Auburn - Lewiston
RFSS 1 · Site 1 (hex 1) · NAC 32 · about 110 mi away
Control 856.0125, 857.4625
Voice 856.0375, 856.0625, 856.0875, 856.2125, 856.2625, 857.2625
Portland Simulcast · Portland
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 129 mi away
Control 852.7875, 853.2875, 853.5375, 853.7875
Voice 851.0625, 851.2875, 851.3125, 851.5625, 851.7875
Biddeford Simulcast · Biddeford Municipal Trunk
RFSS 1 · Site 1 (hex 1) · NAC B61 · about 167 mi away
Control 851.15, 851.8125
Voice 852.4625, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Aurora?

We do not have a fire dispatch channel listed specifically for Aurora. The county-level fire dispatch channels in the same county: Hancock County Fire 154.2500 MHz, FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Aurora?

We do not have a EMS dispatch channel listed specifically for Aurora. The county-level EMS dispatch channels in the same county: Hancock County EMS 151.5500 MHz, DMR, CC 14 · TG 10 · SL *.

What scanner do I need to listen to fire and EMS in Aurora?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Aurora?

For Aurora, start with the Auburn Lewiston Simulcast site of Auburn - Lewiston. Its control channels are 856.0125, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Aurora fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Aurora are marked encrypted.