About Cumberland County Fire and EMS Frequencies
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cumberland County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cumberland County Fire | Countywide Water Supply(Tactical 280) | 154.2800 | CSQ | FMN | WNPG314 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bridgton Hospital | Bridgton Hospital – Ambulance to Hospital | 155.3250 | 107.2 PL | FMN | KTD326 |
| Bridgton Hospital | Bridgton Hospital – Hospital to Ambulance | 155.3250 | 88.5 PL | FMN | KTD326 |
| Maine Medical Center | Ambulance to Hospital | 155.3250 | 82.5 PL | FMN | KNIN326 |
| MaineHealth Hospitals (Brunswick) | Ambulance to Midcoast Hospital (Brunswick) | 155.3250 | 114.8 PL | FM | KNIN326 |
| MaineHealth Hospitals (Brunswick) | Ambulance to Parkview Hospital (Brunswick) | 155.3250 | 141.3 PL | FM | KNIN326 |
| Northern Lights Mercy Hospital | Operations | 464.1000 | 100.0 PL | FMN | WPYT901 |
| St. Mary Hospital | Ambulance to St. Mary's (Portland) | 155.3400 | 94.8 PL | FM | KFI647 |
Radio system sites in Cumberland County
Program the control channel first; your scanner finds the voice channels from it.
Portland Simulcast · Portland
RFSS 1 · Site 1 (hex 1) · NAC 8A1
Control 852.7875, 853.2875, 853.5375, 853.7875
Voice 851.0625, 851.2875, 851.3125, 851.5625, 851.7875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cumberland County
- Baldwin
- Bridgton
- Brunswick
- Cape Elizabeth
- Casco
- Chebeage Island
- Chebeague Island
- Cousins Island
- Cumberland
- Cumberland Center
- Dunstan
- Falmouth
- Falmouth Foreside
- Freeport
- Frye Island
- Gorham
- Gray
- Harpswell
- Harrison
- Little Falls
- Littlejohn Island
- Long Island
- Naples
- New Gloucester
- North Windham
- North Yarmouth
- Oak Hill
- Portland
- Pownal
- Raymond
- Scarborough
- Sebago
- South Portland
- South Windham
- Standish
- Steep Falls
- Westbrook
- Windham
- Yarmouth
Common questions
What scanner do I need to listen to fire and EMS in Cumberland County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Cumberland County?
For Cumberland County, start with the Portland Simulcast site of Portland. Its control channels are 852.7875, 853.2875, 853.5375, 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cumberland County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Cumberland County are marked encrypted.