Skip to content

Milton Fire and EMS Frequencies

We do not have frequencies listed specifically for Milton in Trimble County, Kentucky yet. Countywide channels for Trimble County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Madison (Indiana Project Hoosier SAFE-T), about 3 miles away.

About Milton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Milton: Trimble County Fire 154.1450 MHz, FM, 100.0 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Trimble County channels that also cover Milton

Fire Dispatch

Fire Dispatch frequencies for Trimble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Trimble County FireFire/EMS Dispatch154.1450100.0 PLFMWQJV632
Trimble County FireFire/EMS Dispatch155.6400
In 150.7750
186.2 PLFMWQJV632

Fire Talk-around

Fire Talk-around frequencies for Trimble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Trimble County FireSmith Lane Link150.7900186.2 PLFMNWQJV632
Trimble County FireTrimble County Fire – Bedford Link159.1425127.3 PLFMWQJV632
Trimble County FireProvidence Link159.1425103.5 PLFMNWQJV632
Trimble County FireHWY 42 East Link159.1425100.0 PLFMNWQJV632
Trimble County FireMorton Ridge Lin159.3750114.8 PLFMNWQJV632

Nearest trunked radio sites

Distances are measured from the center of Milton.

Madison · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 31 (hex 1F) · NAC 6B3 · about 3 mi away
Control 857.9625, 858.5125, 858.9625, 859.9625
Voice 853.8625, 856.9625
Jefferson · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 45 (hex 2D) · NAC 6B4 · about 4 mi away
Control 853.5125, 853.7625, 853.9375
Voice 851.175
Oldham Simulcast · Louisville Emergency Communications Network: MetroSafe
RFSS 1 · Site 4 (hex 4) · NAC 1A0 · about 22 mi away
Control 852.625, 853.1
Voice 851.125, 851.35, 852.1, 852.2875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Milton?

We do not have a fire dispatch channel listed specifically for Milton. The county-level fire dispatch channels in the same county: Trimble County Fire 154.1450 MHz, FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Milton?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Milton?

For Milton, start with the Madison site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.