About Trigg County Fire and EMS Frequencies
Quick answer: Fire dispatch for Trigg County: Trigg County Fire 155.1900 MHz, narrow FM, 151.4 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Trigg County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Trigg County Fire | Trigg County Fire – Dispatch (North and South Towers) | 155.1900 In 158.9400 | 151.4 PL | FMN | WPMJ246 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| East Golden Pond Fire | East Golden Pond Fire | 154.3850 | FMN | WPUI398 | |
| Montgomery Fire | Montgomery Fire | 154.0100 | FMN | WPMY343 | |
| Trigg County Fire | Operations | 154.3400 | 74.4 PL | FMN | WPBU319 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Trigg County EMS | Trigg County EMS – Tactical Channel | 155.1600 | 100.0 PL | FMN | WQLF666 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Trigg County Hospital | EMS to Hospital | 155.3400 | 100.0 PL | FMN | WQLF666 |
Radio system sites in Trigg County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Trigg County
Common questions
What frequency does the fire department use in Trigg County?
Fire dispatch channels listed for Trigg County: Trigg County Fire 155.1900 MHz, narrow FM, 151.4 PL.
What scanner do I need to listen to fire and EMS in Trigg County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Trigg County?
For Trigg County, start with the Cadiz site of KY SERVS. Its control channels are 771.60625, 771.99375, 772.64375, 774.64375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Trigg County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Trigg County are marked encrypted.