About Todd County Fire and EMS Frequencies
Quick answer: Fire dispatch for Todd County: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL. Trunked: Todd County Public Safety, for example Todd County Fire talkgroup 10 (hex a).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Todd County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Todd County, start with the Allegre site of KY SERVS. Its control channels: 771.95625, 772.40625, 772.68125 MHz.
Data updated .
Todd County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Dispatch | 151.2500 In 155.9700 | 179.9 PL | FMN | WNAL799 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Tactical Channel | 154.1900 | 146.2 PL | FMN | WNAL799 |
| Todd County Fire | Rescue Squad Tactical | 155.1750 | 156.7 PL | FMN | WNSE866 |
| Todd County Fire | Rescue Squad | 155.5950 In 159.3600 | 156.7 PL | FMN | WNSE866 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Todd County EMS | EMS Backup | 151.2500 In 155.9700 | 167.9 PL | FMN | WNAL799 |
Todd County trunked talkgroups
Todd County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Todd County Fire | Todd County Fire – Dispatch | 10 | a | D |
| Todd County EMS | Todd County EMS – Dispatch | 11 | b | D |
Radio system sites in Todd County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Todd County
Common questions
What frequency does the fire department use in Todd County?
Fire dispatch channels listed for Todd County: Todd County Fire 151.2500 MHz, narrow FM, 179.9 PL.
Do fire departments and EMS use a trunked radio system in Todd County?
Yes. Fire and EMS talkgroups are listed for Todd County Public Safety: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Todd County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Todd County?
For Todd County, start with the Allegre site of KY SERVS. Its control channels are 771.95625, 772.40625, 772.68125, 772.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Todd County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Todd County are marked encrypted.
Are Todd County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Todd County are marked encrypted.