Skip to content

Taylor County Fire and EMS Frequencies

Taylor County in Kentucky has 15 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Taylor County Fire and EMS Frequencies

Quick answer: Fire dispatch for Taylor County: Campbellsville-Taylor Co Fire Dispatch 154.2500 MHz, narrow FM, 74.4 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 9 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Taylor County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Campbellsville-Taylor Co Fire DispatchCampbellsville-Taylor Co Fire Dispatch154.2500
In 151.2200
74.4 PLFMNWQHR893

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Campbellsville-Taylor Co Fire Dept. Vehicle Repeater SystemCampbellsville-Taylor Co Fire Department Vehicle Repeater System153.8675173.8 PLFMNWQHR893
Taylor County FireRescue Squad155.2950
In 154.0100
123.0 PLFMNWQHR893

Fire Talk-around

Fire Talk-around frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Campbellsville-Taylor Co Fire OperationsCampbellsville-Taylor Co Fire Operations155.7825
In 151.1975
025 DPLFMNWRFL672

EMS Talk-around

EMS Talk-around frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Taylor County EMSEMS to Taylor Regional Hospital155.3400123.0 PLFMNKNGD550

Hospitals & Medical

Hospitals & Medical frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HospitalsTaylor Regional Hospital154.0850RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital154.1000RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital154.9725RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital155.3550RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital453.3750
In 458.0875
RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital453.7375
In 458.7375
RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital460.0875
In 465.0875
RAN 50NXDN48KNGD550
HospitalsTaylor Regional Hospital462.8000RAN 50NXDN48WNLF457
HospitalsTaylor Regional Hospital464.5250
In 469.5250
RAN 50NXDN48WNLF457
Taylor County HospitalEMS/Rescue to Springview Hospital155.3400146.2 PLFMNKNGD550

Radio system sites in Taylor County

Program the control channel first; your scanner finds the voice channels from it.

Spurlington · KY SERVS
RFSS 3 · Site 59 (hex 3B) · NAC 9C9
Control 771.43125, 772.65625, 772.98125, 774.23125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Taylor County

Common questions

What frequency does the fire department use in Taylor County?

Fire dispatch channels listed for Taylor County: Campbellsville-Taylor Co Fire Dispatch 154.2500 MHz, narrow FM, 74.4 PL.

What scanner do I need to listen to fire and EMS in Taylor County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Taylor County?

For Taylor County, start with the Spurlington site of KY SERVS. Its control channels are 771.43125, 772.65625, 772.98125, 774.23125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Taylor County fire and EMS frequencies encrypted?

None of the 15 conventional frequencies listed for Taylor County are marked encrypted.