Skip to content

Stanton Fire and EMS Frequencies

We do not have frequencies listed specifically for Stanton in Powell County, Kentucky yet. Countywide channels for Powell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Clay City (KY SERVS), about 1 miles away.

About Stanton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Stanton: Powell County Fire 155.1000 MHz, P25, NAC 292.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Powell County channels that also cover Stanton

Fire Dispatch

Fire Dispatch frequencies for Powell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Powell County FireFire/EMS Dispatch155.1000
In 153.8000
NAC 292P25WQH346

Hospitals & Medical

Hospitals & Medical frequencies for Powell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Powell County HospitalEMS to Clark Regional Hospital155.3400179.9 PLFMNWRD867

Nearest trunked radio sites

Distances are measured from the center of Stanton.

Clay City · KY SERVS
RFSS 3 · Site 52 (hex 34) · NAC 9C0 · about 1 mi away
Control 773.68125
Voice 771.21875, 771.98125, 772.56875
Courthouse · Bath County Emergency Communications Network
RFSS 7 · Site 7 (hex 7) · NAC 064 · about 21 mi away
Control 453.475
Voice 453.1875, 453.75, 460.1375, 460.55
Preston · Bath County Emergency Communications Network
RFSS 3 · Site 3 (hex 3) · NAC 064 · about 21 mi away
Control 453.2, 460.125
Voice 453.05, 453.425, 453.7, 460.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Stanton?

We do not have a fire dispatch channel listed specifically for Stanton. The county-level fire dispatch channels in the same county: Powell County Fire 155.1000 MHz, P25, NAC 292.

What scanner do I need to listen to fire and EMS in Stanton?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Stanton?

For Stanton, start with the Clay City site of KY SERVS. Its control channels are 773.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.