Skip to content

Monroe County Fire and EMS Frequencies

Monroe County in Kentucky has 9 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Monroe County Fire and EMS Frequencies

Quick answer: Fire dispatch for Monroe County: Monroe County Fire 151.1825 MHz, narrow FM, 103.5 PL. EMS dispatch for Monroe County: Monroe County EMS 159.1125 MHz, narrow FM, 69.3 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Monroe County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Monroe County FireMonroe County Fire – Dispatch151.1825
In 155.8575
103.5 PLFMNWQAZ489
Monroe County FireMonroe County Fire – Dispatch151.1825
In 155.8575
NXDN48WQAZ489

Fire Talk-around

Fire Talk-around frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Flippin Fire DeptFlippin Fire Department154.2425
In 159.0450
110.9 PLFMNWPWW626
Monroe County FireFire /Pagers39.5000FMWPYQ963
Monroe County FireMonroe County Fire – Alternate453.3500
In 458.3500
110.9 PLFMNWQAZ489
Monroe County FireMonroe County Fire – Alternate453.8125
In 458.8125
110.9 PLFMNWQAZ489

EMS Dispatch

EMS Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Monroe County EMSMonroe County EMS – Dispatch159.1125
In 153.7775
69.3 PLFMNWQKR912

Hospitals & Medical

Hospitals & Medical frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS to Monroe County Medical CenterEMS to Monroe County Medical Center155.3400FMNWPLP466
Out-of-county EMS to HospitalOut-of-county EMS to Hospital155.1600FMNWPLT448

Radio system sites in Monroe County

Program the control channel first; your scanner finds the voice channels from it.

Tompkinsville · KY SERVS
RFSS 3 · Site 60 (hex 3C) · NAC 9C0
Control 773.94375
Voice 772.61875, 772.88125, 773.41875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Monroe County

Common questions

What frequency does the fire department use in Monroe County?

Fire dispatch channels listed for Monroe County: Monroe County Fire 151.1825 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Monroe County?

EMS dispatch channels listed for Monroe County: Monroe County EMS 159.1125 MHz, narrow FM, 69.3 PL.

What scanner do I need to listen to fire and EMS in Monroe County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Monroe County?

For Monroe County, start with the Tompkinsville site of KY SERVS. Its control channels are 773.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Monroe County fire and EMS frequencies encrypted?

None of the 9 conventional frequencies listed for Monroe County are marked encrypted.