Skip to content

Metcalfe County Fire and EMS Frequencies

Metcalfe County in Kentucky has 10 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Metcalfe County Fire and EMS Frequencies

Quick answer: Fire dispatch for Metcalfe County: Fire (& EMS) 151.4450 MHz, narrow FM, 624 DPL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (P25, NXDN48), which needs a scanner that decodes those modes.

Data updated .

Metcalfe County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Metcalfe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire (& EMS)Metcalfe County Fire North Metcalfe Site151.4450
In 155.9400
624 DPLFMNWPUW579
Fire (& EMS)Metcalfe County Fire North Metcalfe Site P25151.4450
In 155.9400
NAC 285P25WPUW579
Fire (& EMS)Fire (& EMS) – Dispatch154.2050
In 155.9400
624 DPLFMNWPMU579
Fire (& EMS)Dispatch P25154.2050
In 155.9400
NAC 285P25WPMU579
Fire (& EMS)Metcalfe County Fire Summer Shade Site P25155.1225
In 155.9400
NAC 285P25WPMU579
Fire (& EMS)Fire (& EMS) – Dispatch155.1225
In 155.9400
624 DPLFMNWPMU579

Fire Talk-around

Fire Talk-around frequencies for Metcalfe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire (& EMS)Summer Shade Vol. Fire Department154.2200114.8 PLFMNWPCA493
Fire (& EMS)North Metcalfe Volunteer Fire dept.154.3400624 DPLFMNWNAL768
Fire (& EMS)Edmonton Fire Department452.0500
In 457.0500
FMNWNGD771
Fire (& EMS)Edmonton Fire Department452.0500
In 457.0500
NXDN48WNGD771

Radio system sites in Metcalfe County

Program the control channel first; your scanner finds the voice channels from it.

Keltner Mell · KY SERVS
RFSS 3 · Site 56 (hex 38) · NAC 9C6
Control 774.69375
Voice 771.48125, 772.00625, 772.48125, 773.21875, 773.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Metcalfe County

Common questions

What frequency does the fire department use in Metcalfe County?

Fire dispatch channels listed for Metcalfe County: Fire (& EMS) 151.4450 MHz, narrow FM, 624 DPL.

What scanner do I need to listen to fire and EMS in Metcalfe County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25, NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Metcalfe County?

For Metcalfe County, start with the Keltner Mell site of KY SERVS. Its control channels are 774.69375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Metcalfe County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Metcalfe County are marked encrypted.