Skip to content

Meade County Fire and EMS Frequencies

Meade County in Kentucky has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Meade County Fire and EMS Frequencies

Quick answer: Fire dispatch for Meade County: Meade County Fire 155.3850 MHz, narrow FM, 229.1 PL. EMS dispatch for Meade County: Meade County EMS 151.1150 MHz, narrow FM, 229.1 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Meade County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireFire- Tone Out155.3850229.1 PLFMNWQAK556
Meade County FireMeade County Fire – Dispatch157.4850
In 156.0600
229.1 PLFMNWQAK556

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireMeade County Fire – Tactical Channel154.0550FMNWNPG818
Meade County FireMeade County Fire – Tactical Channel154.3550FMNWPIT488
Meade County FireMeade County Fire – Tactical Channel155.0850FMNWPQG797

Fire Talk-around

Fire Talk-around frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireFire-Talkaround & Med Chopper LZ154.1750FMNWYZ321

EMS Dispatch

EMS Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County EMSMeade County EMS – Dispatch151.1150
In 159.0100
229.1 PLFMNWQAK556

Radio system sites in Meade County

Program the control channel first; your scanner finds the voice channels from it.

Ekron · KY SERVS
RFSS 3 · Site 31 (hex 1F) · NAC 9C1
Control 772.89375
Voice 771.79375, 772.21875, 772.46875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Meade County

Common questions

What frequency does the fire department use in Meade County?

Fire dispatch channels listed for Meade County: Meade County Fire 155.3850 MHz, narrow FM, 229.1 PL.

What frequency does EMS or the ambulance service use in Meade County?

EMS dispatch channels listed for Meade County: Meade County EMS 151.1150 MHz, narrow FM, 229.1 PL.

What scanner do I need to listen to fire and EMS in Meade County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Meade County?

For Meade County, start with the Ekron site of KY SERVS. Its control channels are 772.89375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Meade County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Meade County are marked encrypted.