Skip to content

Calhoun Fire and EMS Frequencies

We do not have frequencies listed specifically for Calhoun in McLean County, Kentucky yet. Countywide channels for McLean County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sacramento (KY SERVS), about 1 miles away.

About Calhoun Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Calhoun: McLean County Fire 151.2425 MHz, DMR, CC 10 · TG 11 · SL 2.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

McLean County channels that also cover Calhoun

Fire Dispatch

Fire Dispatch frequencies for McLean County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLean County FireMcLean County Fire – Dispatch151.2425
In 155.9700
CC 10 · TG 11 · SL 2DMRWNJW551
McLean County FireMcLean County Fire – Dispatch155.1000
In 153.8600
DMRWNJW551
McLean County FireMcLean County Fire – Page155.1000
In 153.8600
186.2 PLFMNWNJW551

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McLean County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLean County FireMcLean County Fire – Tactical Channel153.8600FMNWNJW551
McLean County FireMcLean County Fire – Tactical Channel159.1200FMNWPYW520
McLean County FireMcLean County Fire – Tactical Channel159.1800FMNWPYW520

Nearest trunked radio sites

Distances are measured from the center of Calhoun.

Sacramento · KY SERVS
RFSS 3 · Site 111 (hex 6F) · NAC 9CB · about 1 mi away
Control 772.53125, 773.38125, 774.15625, 774.40625
Voice 770.28125, 771.45625
Owensboro · Owensboro Public Safety and Services (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 5EC · about 16 mi away
Control 852.625, 853.0875, 853.575
Voice 851.3125, 851.8125, 852.3125, 852.55, 853.8375
County · Owensboro Public Safety and Services (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 5E2 · about 16 mi away
Control 856.7125, 857.4875, 858.0625, 858.2625
Voice 854.0125, 854.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Calhoun?

We do not have a fire dispatch channel listed specifically for Calhoun. The county-level fire dispatch channels in the same county: McLean County Fire 151.2425 MHz, DMR, CC 10 · TG 11 · SL 2.

What scanner do I need to listen to fire and EMS in Calhoun?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Calhoun?

For Calhoun, start with the Sacramento site of KY SERVS. Its control channels are 772.53125, 773.38125, 774.15625, 774.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.