About Logan County Fire and EMS Frequencies
Quick answer: Fire dispatch for Logan County: Logan Co Fire Dispatch 154.4450 MHz, narrow FM, 114.8 PL; Vhf Fire Paging 154.4450 MHz, narrow FM, no tone. Trunked: Logan County Public Safety NXDN, for example Logan County Fire talkgroup 13 (hex d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Logan County Public Safety NXDN: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Logan County, start with the Russellville site of KY SERVS. Its control channels: 772.61875 MHz.
Data updated .
Logan County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Logan Co Fire Dispatch | Logan Co Fire Dispatch | 154.4450 | 114.8 PL | FMN | KKC935 |
| Vhf Fire Paging | Vhf Fire Paging | 154.4450 | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Logan Memorial Hospital | Housekeeping/Security/Maintenance | 151.8650 | FMN | WZQ864 |
Logan County trunked talkgroups
Logan County Public Safety NXDN
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Logan County Fire | Russellville City Fire Dispatch | 13 | d | D |
| Logan County Fire | Russellville Rural Fire Department Dispatch | 34 | 22 | D |
| Logan County Fire | Olmstead Fire | 36 | 24 | D |
| Logan County Fire | Russellville City Fire Tactical | 14 | e | D |
| Logan County Fire | Russellville Rural Fire Department Tactical | 39 | 27 | D |
| Logan County Fire | Olmstead Fire Tactical | 41 | 29 | D |
| Logan County EMS | Logan County Rescue Dispatch | 11 | b | D |
| Logan County EMS | County EMS Dispatch | 12 | c | D |
Radio system sites in Logan County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Logan County
Common questions
What frequency does the fire department use in Logan County?
Fire dispatch channels listed for Logan County: Logan Co Fire Dispatch 154.4450 MHz, narrow FM, 114.8 PL; Vhf Fire Paging 154.4450 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Logan County?
Yes. Fire and EMS talkgroups are listed for Logan County Public Safety NXDN: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Logan County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Logan County?
For Logan County, start with the Russellville site of KY SERVS. Its control channels are 772.61875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Logan County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Logan County are marked encrypted.
Are Logan County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Logan County are marked encrypted.