Skip to content

Henry County Fire and EMS Frequencies

Henry County in Kentucky has 6 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Henry County Fire and EMS Frequencies

Quick answer: Fire dispatch for Henry County: Eminience Fire Operations and Police 159.2025 MHz, narrow FM, 223 DPL; Henry Co Fire 159.1575 MHz, narrow FM, 110.9 PL; Henry Co Fire/EMS Dispatch 154.1750 MHz, FM, 165 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Henry County Fire talkgroup 10388 (hex 2894).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Henry County, start with the Campbellsburg site of KY SERVS. Its control channels: 773.64375 MHz.

Data updated .

Henry County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Eminience Fire Operations and PoliceEminience Fire Operations and Police159.2025
In 153.9725
223 DPLFMNKNBN614
Henry Co FireHenry Co Fire159.1575110.9 PLFMNWPHY648
Henry Co Fire/EMS DispatchHenry Co Fire/EMS Dispatch154.1750
In 154.9500
165 DPLFMWPHY648

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henry County FireFire/EMS Operations156.0750
In 151.0700
151.4 PLFMNWSKV808

Fire Talk-around

Fire Talk-around frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henry County FireLockport Fire Department154.5700186.2 PLFMN—
Henry County FireHCFD Lockport Repeater159.1800
In 155.8200
186.2 PLFMWPQE800

Henry County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Henry County FireHenry County Fire – Dispatch (Countywide)103882894D
Henry County FireKnightstown Fire – Dispatch103912897D
Henry County FireMiddletown Fire – Dispatch10394289aD

Radio system sites in Henry County

Program the control channel first; your scanner finds the voice channels from it.

Campbellsburg · KY SERVS
RFSS 3 · Site 38 (hex 26) · NAC 9C0
Control 773.64375
Voice -84.21986, 3, 15, 29, 38.65522, 41, 771.91875, 772.16875, 772.94375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Henry County

Common questions

What frequency does the fire department use in Henry County?

Fire dispatch channels listed for Henry County: Eminience Fire Operations and Police 159.2025 MHz, narrow FM, 223 DPL; Henry Co Fire 159.1575 MHz, narrow FM, 110.9 PL; Henry Co Fire/EMS Dispatch 154.1750 MHz, FM, 165 DPL.

Do fire departments and EMS use a trunked radio system in Henry County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Henry County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Henry County?

For Henry County, start with the Campbellsburg site of KY SERVS. Its control channels are 773.64375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Henry County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Henry County are marked encrypted.

Are Henry County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Henry County are marked encrypted.