Skip to content

Hancock County Fire and EMS Frequencies

Hancock County in Kentucky has 8 countywide conventional frequencies and 12 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Hancock County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hancock County: Hancock County Fire 150.9950 MHz, narrow FM, 025 DPL. EMS dispatch for Hancock County: Hancock County EMS 159.4200 MHz, narrow FM, 025 DPL. Trunked: Hancock County Public Safety, for example Hancock County Fire talkgroup 35020 (hex 88cc).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Hancock County Public Safety: 4 talkgroups; Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hancock County, start with the Hawesville site of Hancock County Public Safety. Its control channels: 854.0875, 854.6125, 856.0875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Hancock County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch150.9950
In 153.9500
025 DPLFMNKYK424

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Tactical Channel153.9050FMNWNAX961
Hancock County FireHancock County Fire – Tactical Channel154.3400FMNKD52934
Hancock County FireHancock County Fire – Tactical Channel154.4450FMNKYK424
Hancock County FireHancock County Fire – Tactical Channel155.0700FMNWNAX961
Hancock County FireHancock County Fire – Tactical Channel155.2200FMNKYK424
Hancock County FireHancock County Fire – Tactical Channel155.2650FMNWRZ242

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSHancock County EMS – Dispatch159.4200
In 153.8600
025 DPLFMNWNAX961

Hancock County trunked talkgroups

Hancock County Public Safety

Hancock County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire Main Dispatch Channel3502088ccD
Hancock County FireHancock County Fire Punch Out3501988cbD
Hancock County FireHancock County Fire Operations3504488e4D
Hancock County EMSHancock County EMS Dispatch3501088c2D

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Control (County)10332285cD
Hancock County FireHancock County Fire – Dispatch (County) (Multicast on 155.82)10382288eD
Hancock County FireHancock County Fire – Fire Ground (County)103262856D
Hancock County FireHancock County Fire – Fire Ground (County)103272857D
Hancock County FireHancock County Fire – Fire Ground (County)103282858D
Hancock County FireHancock County Fire – Fire Ground (County)103292859D
Hancock County FireHancock County Fire – Fire Ground (County)10330285aD
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Marshal (County)10331285bD Encrypted

Radio system sites in Hancock County

Program the control channel first; your scanner finds the voice channels from it.

Hawesville · Hancock County Public Safety
RFSS 16 · Site 18 (hex 12) · NAC F1E
Control 854.0875, 854.6125, 856.0875, 858.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hancock County

Common questions

What frequency does the fire department use in Hancock County?

Fire dispatch channels listed for Hancock County: Hancock County Fire 150.9950 MHz, narrow FM, 025 DPL.

What frequency does EMS or the ambulance service use in Hancock County?

EMS dispatch channels listed for Hancock County: Hancock County EMS 159.4200 MHz, narrow FM, 025 DPL.

Do fire departments and EMS use a trunked radio system in Hancock County?

Yes. Fire and EMS talkgroups are listed for Hancock County Public Safety: 4 talkgroups; Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hancock County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hancock County?

For Hancock County, start with the Hawesville site of Hancock County Public Safety. Its control channels are 854.0875, 854.6125, 856.0875, 858.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hancock County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Hancock County are marked encrypted.

Are Hancock County fire and EMS talkgroups encrypted?

1 of the 12 talkgroups listed for Hancock County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.