About Mayfield Fire and EMS Frequencies
Quick answer: Fire dispatch for Mayfield: Mayfield Fire 159.4650 MHz, P25, NAC 345. Trunked: KY SERVS, for example Mayfield Fire talkgroup 10511 (hex 290f).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 9 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: KY SERVS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mayfield, start with the Farmington site of KY SERVS, about 0 miles away. Its control channels: 770.55625, 770.81875, 771.13125 MHz.
- 2 entries are marked expired, so they may no longer be in use.
Data updated .
Mayfield conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mayfield Fire | Mayfield Fire – Dispatch (*Rptr Reversed) | 159.4650 In 151.2950 | NAC 345 | P25 | WQKH753 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mayfield Fire Expired: Expired 3/23 | Mayfield Fire – Operations (Channel 2) | 154.2050 | 162.2 PL | FMN | KVP721 |
| Mayfield Fire | Mayfield Fire – Operations (Channel 3) | 155.2650 In 150.7750 | 241.8 PL | FMN | WPPB973 |
Mayfield trunked talkgroups
KY SERVS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mayfield Fire | Mayfield Fire/EMS | 10511 | 290f | D |
| Mayfield Fire | Mayfield Fire/EMS Tactical | 10512 | 2910 | D |
Graves County channels that also cover Mayfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Graves County Fire | Graves County Fire – Dispatch | 154.8825 In 159.4500 | 503 DPL | FMN | WQST898 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management Expired: Expired 3/04 | EMA – County Fire Coordination | 159.2550 In 151.2650 | 162.2 PL | FMN | KKC753 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire - Rescue Repeater | Fire – Rescue Repeater – Repeater | 155.3700 In 156.0300 | NAC 2D4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Farmington Repeater | 151.0025 In 156.0675 | 173.8 PL | FMN | WQBQ773 |
| Graves County Fire | Graves County Fire – Wingo Repeater | 151.0175 In 159.0900 | NAC 3A4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Mayfield Repeater | 151.1675 In 155.9700 | NAC 2E4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Fancy Farm Repeater | 151.2050 In 155.3175 | NAC 384 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Melber Repeater | 151.3100 In 154.9875 | NAC 3C4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Lynnville Repeater | 151.3550 In 159.3900 | NAC 2F4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Symsonia Repeater | 151.3700 In 156.0300 | NAC 2D4 | P25 | WQPR285 |
| Graves County Fire | Fire-Central Repeater | 155.8875 In 153.9950 | NAC 340 | P25 | WQYA393 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson Purchase Medical Center | EMS to Hospital | 155.3400 | 114.8 PL | FMN | KNDZ225 |
Nearest trunked radio sites
Distances are measured from the center of Mayfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mayfield?
Fire dispatch channels listed for Mayfield: Mayfield Fire 159.4650 MHz, P25, NAC 345.
Do fire departments and EMS use a trunked radio system in Mayfield?
Yes. Fire and EMS talkgroups are listed for KY SERVS: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mayfield?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mayfield?
For Mayfield, start with the Farmington site of KY SERVS. Its control channels are 770.55625, 770.81875, 771.13125, 771.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Mayfield fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Mayfield are marked encrypted.
Are Mayfield fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Mayfield are marked encrypted.