About Lancaster Fire and EMS Frequencies
Quick answer: Fire dispatch for Lancaster: Lancaster Fire 154.1000 MHz, narrow FM, 146.2 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Lancaster conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lancaster Fire | Lancaster Fire – Dispatch | 154.1000 | 146.2 PL | FMN | WNRL346 |
Garrard County channels that also cover Lancaster
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Garrard County Fire | Fire/EMS Dispatch | 155.8800 In 153.7400 | 118.8 PL | FMN | WPKF672 |
| Garrard County Fire | Fire/EMS Dispatch (P25) | 155.8800 In 153.7400 | NAC 118 | P25 | WPKF672 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Garrard County Fire | Talk-Around | 154.2950 | CSQ | FMN | WQBA760 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Garrard County Fire | Operations | 150.7750 | 131.8 PL | FMN | — |
| Garrard County Fire | Operations | 154.1000 | 118.8 PL | FMN | WNRL346 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Garrard County Hospital | Garrard County Hospital – Paging | 152.0075 | FMN | KIU877 | |
| Garrard County Hospital | EMS to McDowell Hospital (Danville) | 155.3400 | 118.8 PL | FMN | KZC440 |
Nearest trunked radio sites
Distances are measured from the center of Lancaster.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lancaster?
Fire dispatch channels listed for Lancaster: Lancaster Fire 154.1000 MHz, narrow FM, 146.2 PL.
What scanner do I need to listen to fire and EMS in Lancaster?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Lancaster?
For Lancaster, start with the Big Hill North Backup Site site of Bluegrass Regional Radio Network (BRRN). Its control channels are 851.425 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lancaster fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Lancaster are marked encrypted.