Skip to content

Franklin County Fire and EMS Frequencies

Franklin County in Kentucky has 3 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Franklin County Fire and EMS Frequencies

Quick answer: Trunked: Indiana Project Hoosier SAFE-T, for example Franklin County Fire talkgroup 21226 (hex 52ea).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin County, start with the Bald Knob site of KY SERVS. Its control channels: 772.45625, 773.18125, 774.48125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Franklin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch154.4300
In 154.0700
RAN 21NXDN48 EncryptedWNUN939

EMS Talk-around

EMS Talk-around frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County EMSFranklin County EMS – Talk Around159.4200203.5 PLFMNWQBM797

Hospitals & Medical

Hospitals & Medical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS to FFT Regional MedicalEMS to FFT Regional Medical155.3400156.7 PLFMNWQRD895

Franklin County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Franklin County FireFranklin County Fire – Dispatch2122652eaD
Franklin County FireFranklin County Fire – Fire Ground2122752ebD
Franklin County FireFranklin County Fire – Fire Ground2122852ecD
Franklin County FireFranklin County Fire – Fire Ground2122952edD
Franklin County EMSFranklin County EMS – Dispatch2121752e1D
Franklin County EMSFranklin County EMS – Operations2121852e2D
Franklin County EMSFranklin County EMS – Operations2121952e3D
Franklin County EMSFranklin County EMS – Operations2122052e4D

Radio system sites in Franklin County

Program the control channel first; your scanner finds the voice channels from it.

Bald Knob · KY SERVS
RFSS 3 · Site 53 (hex 35) · NAC 9C3
Control 772.45625, 773.18125, 774.48125, 774.88125
Voice 771.85625, 772.13125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Franklin County

Common questions

Do fire departments and EMS use a trunked radio system in Franklin County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Franklin County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Franklin County?

For Franklin County, start with the Bald Knob site of KY SERVS. Its control channels are 772.45625, 773.18125, 774.48125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin County fire and EMS frequencies encrypted?

1 of the 3 conventional frequencies listed for Franklin County are marked encrypted; a scanner cannot decode encrypted audio.

Are Franklin County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Franklin County are marked encrypted.