About Albany Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Albany: Clinton County Fire 154.3100 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Albany: Clinton County EMS 155.9250 MHz, narrow FM, 203.5 PL; Transcare EMS 155.4000 MHz, narrow FM, 192.8 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Clinton County channels that also cover Albany
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Fire | Clinton County Fire – Dispatch | 154.3100 In 153.7700 | 114.8 PL | FMN | WPKS843 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County EMS | Clinton County EMS – Dispatch | 155.9250 In 158.7525 | 203.5 PL | FMN | WPWF462 |
| Transcare EMS | Transcare EMS | 155.4000 | 192.8 PL | FMN | WPTH741 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County EMS | Rescue Squad | 155.2950 | FMN | WPFT860 |
Nearest trunked radio sites
Distances are measured from the center of Albany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Albany?
We do not have a fire dispatch channel listed specifically for Albany. The county-level fire dispatch channels in the same county: Clinton County Fire 154.3100 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Albany?
We do not have a EMS dispatch channel listed specifically for Albany. The county-level EMS dispatch channels in the same county: Clinton County EMS 155.9250 MHz, narrow FM, 203.5 PL; Transcare EMS 155.4000 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Albany?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Albany?
For Albany, start with the Burkesville site of KY SERVS. Its control channels are 772.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.