About Christian County Fire and EMS Frequencies
Quick answer: Fire dispatch for Christian County: County Public Safety 154.4450 MHz, narrow FM, 156.7 PL. Trunked: Christian County, for example Christian County Fire talkgroup 19 (hex 13).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Christian County: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Christian County, start with the Hopkinsville site of Christian County. Its control channels: 460.4625 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Christian County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | Christian County Fire/Rescue Paging | 154.4450 | 156.7 PL | FMN | KKR592 |
| County Public Safety | Hopkinsville Fire Paging | 155.7600 | 123.0 PL | FMN | WRPL284 |
Christian County trunked talkgroups
Christian County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Christian County Fire | Todd Mutual | 19 | 13 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Christian County Fire | Christian County Fire Dispatch | 6 | 6 | D Encrypted |
| Christian County Fire | Christian County Fire Operations | 7 | 7 | D Encrypted |
| Christian County EMS | Christian County EMS Dispatch | 10 | a | D Encrypted |
Radio system sites in Christian County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Christian County
Common questions
What frequency does the fire department use in Christian County?
Fire dispatch channels listed for Christian County: County Public Safety 154.4450 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Christian County?
Yes. Fire and EMS talkgroups are listed for Christian County: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Christian County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Christian County?
For Christian County, start with the Hopkinsville site of Christian County. Its control channels are 460.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Christian County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Christian County are marked encrypted.
Are Christian County fire and EMS talkgroups encrypted?
3 of the 4 talkgroups listed for Christian County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.