About Bath County Fire and EMS Frequencies
Quick answer: Fire dispatch for Bath County: Bethel Fire Department 453.4750 MHz, FM, 156.7 PL; Olympia Spring Fire Dept. 453.4750 MHz, FM, 118.8 PL; Preston Fire Department 453.4750 MHz, narrow FM, 103.5 PL. EMS dispatch for Bath County: Bath County EMS 453.4250 MHz, FM, 100.0 PL. Trunked: Bath County Emergency Communications Network, for example Bath County EMS talkgroup 5001 (hex 1389).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Bath County Emergency Communications Network: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bath County, start with the Bald Eagle Tank site of Bath County Emergency Communications Network. Its control channels: 453.6125, 460.225 MHz.
Data updated .
Bath County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bethel Fire Department | Bethel Fire Department | 453.4750 In 458.4750 | 156.7 PL | FM | KNNR935 |
| Olympia Spring Fire Dept. | Olympia Spring Fire Department | 453.4750 In 458.4750 | 118.8 PL | FM | KNNR935 |
| Preston Fire Department | Preston Fire Department | 453.4750 In 458.4750 | 103.5 PL | FMN | KNNR935 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bath County Fire | Rescue Squad | 453.1625 In 458.1625 | 100.0 PL | FM | WPTZ357 |
| Bath County Fire | Bath County Fire – Fire Ground | 453.4750 In 458.4750 | 100.0 PL | FM | KNNR935 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bath County EMS | Bath County EMS – Dispatch | 453.4250 In 458.4250 | 100.0 PL | FM | WQAA361 |
Bath County trunked talkgroups
Bath County Emergency Communications Network
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bath County EMS | Bath County EMS | 5001 | 1389 | D |
Radio system sites in Bath County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bath County
Common questions
What frequency does the fire department use in Bath County?
Fire dispatch channels listed for Bath County: Bethel Fire Department 453.4750 MHz, FM, 156.7 PL; Olympia Spring Fire Dept. 453.4750 MHz, FM, 118.8 PL; Preston Fire Department 453.4750 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Bath County?
EMS dispatch channels listed for Bath County: Bath County EMS 453.4250 MHz, FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Bath County?
Yes. Fire and EMS talkgroups are listed for Bath County Emergency Communications Network: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bath County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bath County?
For Bath County, start with the Bald Eagle Tank site of Bath County Emergency Communications Network. Its control channels are 453.6125, 460.225 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bath County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Bath County are marked encrypted.
Are Bath County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Bath County are marked encrypted.