Skip to content

Ballard County Fire and EMS Frequencies

Ballard County in Kentucky has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Ballard County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ballard County: Ballard County Fire Dispatch 154.0250 MHz, narrow FM, 123.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Ballard County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ballard County Fire DispatchBallard County Fire Dispatch154.0250
In 151.0100
123.0 PLFMNKNDZ310

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bandana Fireground FireBandana Fireground154.3100127.3 PLFMNWNLF466
Kevil Fireground FireKevil Fireground154.4300123.0 PLFMNKNCZ224

EMS Talk-around

EMS Talk-around frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ballard County EMSBallard County EMS155.1600123.0 PLFMNWPKH301
Ballard County EMSBallard County EMS155.3400FMN—
Ballard County EMSBallard County EMS155.7675
In 159.0825
NAC 295P25WQAU444

Radio system sites in Ballard County

Program the control channel first; your scanner finds the voice channels from it.

Wickliffe · KY SERVS
RFSS 3 · Site 106 (hex 6A) · NAC 9C6
Control 771.33125, 772.00625, 772.65625, 773.40625
Voice 769.35625, 770.76875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ballard County

Common questions

What frequency does the fire department use in Ballard County?

Fire dispatch channels listed for Ballard County: Ballard County Fire Dispatch 154.0250 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Ballard County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Ballard County?

For Ballard County, start with the Wickliffe site of KY SERVS. Its control channels are 771.33125, 772.00625, 772.65625, 773.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ballard County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Ballard County are marked encrypted.