About Allen County Fire and EMS Frequencies
Quick answer: Fire dispatch for Allen County: Allen County Fire Dispatch 453.5500 MHz, narrow FM, 141.3 PL. EMS dispatch for Allen County: Allen County EMS 463.0750 MHz, narrow FM, 114.8 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
Data updated .
Allen County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allen County Fire Dispatch | Allen County Fire Dispatch | 453.5500 In 458.5500 | 141.3 PL | FMN | WPSH996 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allen County Fire | Allen County Emergency Management | 453.1875 In 458.1875 | 141.3 PL | FMN | WQHA642 |
| Allen County Fire | Allen County Emergency Management | 460.5000 In 465.5000 | FMN | WQHA642 | |
| Allen County Rescue - Analog | Allen County Rescue – Analog | 453.1250 In 458.1250 | 103.5 PL | FMN | WPSH996 |
| Allen County Rescue - Digital | Allen County Rescue – Digital | 453.1200 In 458.1250 | NXDN96 | WPSH996 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cedar Springs Fire - Analog | Cedar Springs Fire – Analog | 453.5875 In 458.5875 | FMN | WQLS895 | |
| Cedar Springs Fire - Digital | Cedar Springs Fire – Digital | 453.5875 In 458.5875 | NXDN96 | WQLS895 | |
| South Allen Fire - Analog | South Allen Fire – Analog | 453.2875 In 458.2875 | FMN | WQLJ720 | |
| South Allen Fire - Digital | South Allen Fire – Digital | 453.2875 In 458.2875 | NXDN96 | WQLJ720 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allen County EMS | Allen County EMS – Dispatch (Med Center Bowling Green) | 463.0750 In 468.0750 | 114.8 PL | FMN | WPIS557 |
| Allen County EMS | Allen County EMS – Dispatch (Med Center Bowling Green) | 463.0750 In 468.0750 | RAN 10 | NXDN96 | WPIS557 |
Radio system sites in Allen County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Allen County
Common questions
What frequency does the fire department use in Allen County?
Fire dispatch channels listed for Allen County: Allen County Fire Dispatch 453.5500 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Allen County?
EMS dispatch channels listed for Allen County: Allen County EMS 463.0750 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Allen County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Allen County?
For Allen County, start with the Scottsville site of KY SERVS. Its control channels are 773.89375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Allen County fire and EMS frequencies encrypted?
None of the 11 conventional frequencies listed for Allen County are marked encrypted.