About Adair County Fire and EMS Frequencies
Quick answer: Fire dispatch for Adair County: Columbia Adair Fire 159.4125 MHz, P25, NAC 2. EMS dispatch for Adair County: Adair County EMS 158.8200 MHz, narrow FM, 146.2 PL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Adair County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Columbia Adair Fire | Columbia Adair Fire | 159.4125 In 154.1375 | NAC 2 | P25 | WQRS907 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adair County Fire | Emergency Management | 155.1150 In 153.8150 | 100.0 PL | FMN | WNZK557 |
| Adair County Fire | Rescue Squad | 155.2200 | 79.7 PL | FMN | KNDD789 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Breeding Volunteer FD Paging Fire | Breeding Volunteer Fire Department Paging | 154.1150 In 158.9400 | 127.3 PL | FMN | WPPE625 |
| Knifley Area Volunteer Fire | Knifley Area Volunteer Fire | 155.8350 In 153.8900 | 107.2 PL | FMN | WPSG238 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adair County EMS | Adair County EMS – Dispatch | 158.8200 In 153.7550 | 146.2 PL | FMN | WNRL505 |
| Adair County EMS | Dispatch D | 159.3975 In 154.1375 | NAC 1 | P25 | WQRS926 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adair County EMS | Adair County EMS – Alternate | 153.9950 | 146.2 PL | FMN | WNRL505 |
| Adair County EMS | Adair County EMS – Alternate | 155.2200 | 79.7 PL | FMN | KNDD789 |
| Adair County EMS | Ambulance Service | 155.3400 | FMN | KNDD789 |
Radio system sites in Adair County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Adair County
Common questions
What frequency does the fire department use in Adair County?
Fire dispatch channels listed for Adair County: Columbia Adair Fire 159.4125 MHz, P25, NAC 2.
What frequency does EMS or the ambulance service use in Adair County?
EMS dispatch channels listed for Adair County: Adair County EMS 158.8200 MHz, narrow FM, 146.2 PL.
What scanner do I need to listen to fire and EMS in Adair County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Adair County?
For Adair County, start with the Columbia site of KY SERVS. Its control channels are 773.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Adair County fire and EMS frequencies encrypted?
None of the 10 conventional frequencies listed for Adair County are marked encrypted.