About Wallace County Police Frequencies
Quick answer: Dispatch for Wallace County: Wallace County Sheriff 154.0850 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Wallace County Sheriff talkgroup 4796 (hex 12bc).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wallace County, start with the Wallace site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.3125, 852.6125 MHz.
Data updated .
Wallace County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wallace County Sheriff | Wallace County Sheriff – Dispatch | 154.0850 In 158.7750 | FMN | WQDZ454 |
Wallace County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wallace County Sheriff | Wallace County Sheriff – Dispatch | 4796 | 12bc | D |
Radio system sites in Wallace County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wallace County
Common questions
What frequency do the police use in Wallace County?
Dispatch channels listed for Wallace County: Wallace County Sheriff 154.0850 MHz, narrow FM, no tone.
What is the sheriff's dispatch frequency in Wallace County?
Wallace County Sheriff 154.0850 MHz, narrow FM, no tone.
Do the police use a trunked radio system in Wallace County?
Yes. Law-enforcement talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Wallace County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wallace County?
For Wallace County, start with the Wallace site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wallace County police frequencies encrypted?
None of the 1 conventional frequencies listed for Wallace County are marked encrypted.
Are Wallace County police talkgroups encrypted?
None of the 1 talkgroups listed for Wallace County are marked encrypted.