About Jackson Police Frequencies
Quick answer: County-level dispatch that covers Jackson: Sumner County Sheriff 460.2250 MHz, narrow FM, 114.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Sumner County Sheriff talkgroup 602 (hex 25a).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Sumner County Public Safety: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Sumner County channels that also cover Jackson
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sumner County Sheriff | Sumner County Sheriff – Dispatch (Dispatch before TRS) | 460.2250 In 465.2250 | 114.8 PL | FMN | KNEB754 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel (Secondary before TRS) | 460.3750 In 465.3750 | 114.8 PL | FMN | KNEB754 |
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel | 851.2000 In 806.2000 | 114 DPL | FMN | WPTW851 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sumner County Sheriff | Sumner County Sheriff – Dispatch | 602 | 25a | D |
Sumner County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sumner County Sheriff | Sheriff Patrol | 101075 | 18ad3 | D |
| Sumner County Sheriff | Sheriff Patrol 1 South | 101150 | 18b1e | D |
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel | 101078 | 18ad6 | D |
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel | 101079 | 18ad7 | D |
| Sumner County Sheriff | Sheriff Patrol 2 South | 101151 | 18b1f | D |
| Sumner County Sheriff | Sheriff Patrol | 102075 | 18ebb | D |
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel | 102078 | 18ebe | D |
| Sumner County Sheriff | Sumner County Sheriff – Tactical Channel | 102079 | 18ebf | D |
Nearest trunked radio sites
Distances are measured from the center of Jackson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Jackson?
We do not have a dispatch channel listed specifically for Jackson. The county sheriff's dispatch channels in the same county: Sumner County Sheriff 460.2250 MHz, narrow FM, 114.8 PL.
Do the police use a trunked radio system in Jackson?
Yes. The county-level systems that cover Jackson are Law-enforcement talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Sumner County Public Safety: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Jackson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jackson?
For Jackson, start with the South Haven site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.