Skip to content

Sumner County Fire and EMS Frequencies

Sumner County in Kansas has 10 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 49 cities and communities below for local fire departments and EMS agencies.

About Sumner County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sumner County: Sumner County Fire 46.1400 MHz, FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Sumner County Hospital talkgroup 664 (hex 298).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Sumner County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sumner County, start with the Mayfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.3125, 852.6125 MHz.

Data updated .

Sumner County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sumner County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumner County FireSumner County Fire – Dispatch (Old Low Band Frequency)46.1400FMWNFR702
Sumner County FireFire and EMS Page Out – Riverdale Tower159.1425CSQFMNWPSQ547
Sumner County FireFire and EMS Page Out163.2500CSQFMNWPSQ547
Sumner County FireFire and EMS (Dispatch before TRS)453.5750
In 458.5750
162.2 PLFMNWNUW940

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sumner County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumner County FireFire and EMS453.0500
In 458.0500
FMNWPLU366
Sumner County FireFire Mutual Aid453.1250
In 458.1250
FMNWPFY707
Sumner County FireFire and EMS453.1750
In 458.1750
FMNWPFY707
Sumner County FireFire and EMS Tactical453.3500
In 458.3500
103.5 PLFMNWNNY465
Sumner County FireFire Mutual Aid453.5000
In 458.5000
114.8 PLFMNWNRW324
Sumner County FireFire and EMS Tactical453.6750
In 458.6750
114.8 PLFMNWNRT537

Sumner County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Sumner County HospitalSumner Regional Medical Center664298D
Sumner County HospitalSumner County Hospital665299D

Sumner County Public Safety

Sumner County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Sumner County FireFie and EMS Dispatch10107618ad4D
Sumner County FireFire and EMS 2 Tactical10207618ebcD

Radio system sites in Sumner County

Program the control channel first; your scanner finds the voice channels from it.

Mayfield · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 14 (hex E) · NAC 1B7
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
South Haven · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 63 (hex 3F) · NAC 1B0
Control 857.4875
Voice 856.9875, 858.4875, 859.2125, 859.4375, 859.7125
Wellington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 64 (hex 40) · NAC 1B0
Control 856.0375, 856.4375
Voice 854.0375, 857.0375, 857.2375, 858.2375
Caldwell · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 65 (hex 41) · NAC 1B0
Voice 856.0875, 856.9375, 858.0375, 858.7125, 859.2375, 859.9875
Sumner Co · Sumner County Public Safety
Site 1 (hex 1)
Voice 460.0375, 460.1125, 460.1375, 460.1875, 460.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sumner County

Common questions

What frequency does the fire department use in Sumner County?

Fire dispatch channels listed for Sumner County: Sumner County Fire 46.1400 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Sumner County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Sumner County Public Safety: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sumner County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sumner County?

For Sumner County, start with the Mayfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sumner County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Sumner County are marked encrypted.

Are Sumner County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Sumner County are marked encrypted.