Skip to content

Stevens County Fire and EMS Frequencies

Stevens County in Kansas has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Stevens County Fire and EMS Frequencies

Quick answer: EMS dispatch for Stevens County: Stevens County EMS 464.4000 MHz, DMR, CC 1 · TG 31 · SL 1.

  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Stevens County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County EMSEmergency Services464.4000
In 469.4000
CC 1 · TG 31 · SL 1DMRWNML303

Radio system sites in Stevens County

Program the control channel first; your scanner finds the voice channels from it.

Moscow · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 33 (hex 21) · NAC 1B6
Control 852.2375
Voice 851.9, 852.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Stevens County

Common questions

What frequency does EMS or the ambulance service use in Stevens County?

EMS dispatch channels listed for Stevens County: Stevens County EMS 464.4000 MHz, DMR, CC 1 · TG 31 · SL 1.

What scanner do I need to listen to fire and EMS in Stevens County?

A scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Stevens County?

For Stevens County, start with the Moscow site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stevens County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Stevens County are marked encrypted.