Skip to content

Seward County Fire and EMS Frequencies

Seward County in Kansas has 8 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Seward County Fire and EMS Frequencies

Quick answer: Fire dispatch for Seward County: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL. EMS dispatch for Seward County: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Seward County Fire talkgroup 578 (hex 242).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Seward County, start with the Liberal site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 856.2125 MHz.

Data updated .

Seward County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireFire VHF158.7450
In 153.7550
146.2 PLFMNKNIG939
Seward County FireSeward County Fire – Dispatch453.9500
In 458.9500
110.9 PLFMNKNIG939

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireFire Mutual Aid453.4250
In 458.4250
192.8 PLFMNKNIG939
Seward County FireFire Mutual Aid453.7000
In 458.7000
167.9 PLFMNWNBJ765
Seward County FireFire Mutual Aid460.0500
In 465.0500
127.3 PLFMNKNIG939
Seward County FireFire Mutual Aid460.3250
In 465.3250
241.8 PLFMNKNIG939
Seward County FireSeward County Fire – Fire Ground464.5000103.5 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County EMSSeward County EMS – Dispatch463.1750
In 468.1750
167.9 PLFMNKNIG939

Seward County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Seward County FireRural Fire Dispatch578242D
Seward County EMSSeward County EMS – Dispatch582246D

Radio system sites in Seward County

Program the control channel first; your scanner finds the voice channels from it.

Liberal · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 57 (hex 39)
Control 856.2125
Voice 854.9875, 857.2125, 857.7625, 858.2125, 858.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Seward County

Common questions

What frequency does the fire department use in Seward County?

Fire dispatch channels listed for Seward County: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Seward County?

EMS dispatch channels listed for Seward County: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Seward County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Seward County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Seward County?

For Seward County, start with the Liberal site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Seward County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Seward County are marked encrypted.

Are Seward County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Seward County are marked encrypted.