About Scott County Fire and EMS Frequencies
Quick answer: EMS dispatch for Scott County: Scott County EMS 462.9500 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Scott County Fire talkgroup 516 (hex 204).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Scott County, start with the Modoc site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.4625, 852.725 MHz.
Data updated .
Scott County conventional frequencies
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Scott County EMS – Dispatch (before KSICS) | 462.9500 In 467.9500 | FMN | WYR533 | |
| Scott County EMS | Scott County EMS – Dispatch (before KSICS) | 462.9750 In 467.9750 | FMN | WYR533 |
Scott County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scott County Fire | Scott County Fire – Dispatch | 516 | 204 | D |
| Scott County Fire | Scott County Fire – Tactical Channel | 585 | 249 | D |
| Scott County EMS | Scott County EMS – Dispatch | 573 | 23d | D |
| Scott County EMS | Scott County EMS – Tactical Channel | 574 | 23e | D |
Radio system sites in Scott County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Scott County
Common questions
What frequency does EMS or the ambulance service use in Scott County?
EMS dispatch channels listed for Scott County: Scott County EMS 462.9500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Scott County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Scott County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Scott County?
For Scott County, start with the Modoc site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Scott County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Scott County are marked encrypted.
Are Scott County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Scott County are marked encrypted.