Skip to content

Rush County Fire and EMS Frequencies

Rush County in Kansas has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 23 cities and communities below for local fire departments and EMS agencies.

About Rush County Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Rush County Fire talkgroup 458 (hex 1ca).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rush County, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.7375, 852.0625 MHz.

Data updated .

Rush County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County FireFire and EMS453.3500
In 458.3500
FMNWNMJ820
Rush County FireFire and EMS453.9250
In 458.9250
FMNWNMJ820

Rush County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County FireRush County Fire – Dispatch4581caD

Radio system sites in Rush County

Program the control channel first; your scanner finds the voice channels from it.

Rush Center · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 22 (hex 16) · NAC 1B9
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Rush County

Common questions

Do fire departments and EMS use a trunked radio system in Rush County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rush County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rush County?

For Rush County, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rush County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Rush County are marked encrypted.

Are Rush County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Rush County are marked encrypted.