About Pratt County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pratt County: Pratt County Fire 453.4875 MHz, narrow FM, no tone. EMS dispatch for Pratt County: Pratt County EMS 453.8250 MHz, narrow FM, 731 DPL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Pratt County EMS talkgroup 662 (hex 296).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pratt County, start with the Preston site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.
Data updated .
Pratt County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County Fire | Fire/EMS West | 453.4875 In 458.4875 | FMN | WQDG938 | |
| Pratt County Fire | Pratt County Fire – Dispatch | 460.6250 In 465.6250 | 731 DPL | FMN | WNKD210 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County EMS | Pratt County EMS – Dispatch | 453.8250 In 458.8250 | 731 DPL | FMN | WPJK625 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County Hospital | EMS to Hospital | 463.1250 In 468.1250 | 192.8 PL | FMN | — |
Pratt County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pratt County EMS | Pratt County EMS – Dispatch | 662 | 296 | D |
| Pratt County Hospital | Pratt Regional Medical Center | 669 | 29d | D |
Radio system sites in Pratt County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pratt County
Common questions
What frequency does the fire department use in Pratt County?
Fire dispatch channels listed for Pratt County: Pratt County Fire 453.4875 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Pratt County?
EMS dispatch channels listed for Pratt County: Pratt County EMS 453.8250 MHz, narrow FM, 731 DPL.
Do fire departments and EMS use a trunked radio system in Pratt County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pratt County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pratt County?
For Pratt County, start with the Preston site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pratt County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Pratt County are marked encrypted.
Are Pratt County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Pratt County are marked encrypted.