About Ottawa County Fire and EMS Frequencies
Quick answer: Fire dispatch for Ottawa County: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Ottawa County Fire talkgroup 5210 (hex 145a).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ottawa County, start with the Bennington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.7375, 852.0625 MHz.
Data updated .
Ottawa County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ottawa County Fire | Fire Tone Out | 453.3000 In 458.3000 | 107.2 PL | FMN | WNLU429 |
| Ottawa County Fire | Ottawa County Fire – Dispatch (Dispatch before KSICS) | 453.5500 In 458.5500 | 146.2 PL | FMN | WPUD315 |
Ottawa County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ottawa County Fire | Ottawa County Fire – Dispatch | 5210 | 145a | D |
| Ottawa County Fire | Fire Event | 5211 | 145b | D |
| Ottawa County Fire | Fire Event | 5212 | 145c | D |
| Ottawa County Fire | Fire Event | 5213 | 145d | D |
Radio system sites in Ottawa County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Ottawa County
Common questions
What frequency does the fire department use in Ottawa County?
Fire dispatch channels listed for Ottawa County: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Ottawa County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ottawa County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ottawa County?
For Ottawa County, start with the Bennington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ottawa County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Ottawa County are marked encrypted.
Are Ottawa County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Ottawa County are marked encrypted.