About Osage County Fire and EMS Frequencies
Quick answer: Fire dispatch for Osage County: Osage County Fire 453.4250 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Osage County Fire talkgroup 1326 (hex 52e).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Osage County, start with the Scranton site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.475, 852.65 MHz.
Data updated .
Osage County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Osage County Fire | Fire and EMS Dispatch | 453.4250 In 458.4250 | FMN | WPNT670 |
Osage County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Osage County Fire | Osage County Fire – Dispatch | 1326 | 52e | D |
| Osage County EMS | Osage County EMS – Dispatch | 1658 | 67a | D |
Radio system sites in Osage County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Osage County
Common questions
What frequency does the fire department use in Osage County?
Fire dispatch channels listed for Osage County: Osage County Fire 453.4250 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Osage County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Osage County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Osage County?
For Osage County, start with the Scranton site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.475, 852.65 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Osage County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Osage County are marked encrypted.
Are Osage County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Osage County are marked encrypted.